|
|
SparkFun Accessories The Molex GNSS Flex antenna is a great option for basic GNSS applications and will work with any of our GNSS boards equipped with a U.FL at a fraction of the cost of many of its big brothers. This antenna supports GPS Galileo BeiDou and GLONASS in
- GPS-15246
- SparkFun
-
1:
$10.04
-
2In Stock
|
Mouser Part No
474-GPS-15246
|
SparkFun
|
SparkFun Accessories The Molex GNSS Flex antenna is a great option for basic GNSS applications and will work with any of our GNSS boards equipped with a U.FL at a fraction of the cost of many of its big brothers. This antenna supports GPS Galileo BeiDou and GLONASS in
|
|
2In Stock
|
|
Min.: 1
Mult.: 1
|
|
|
Antennas
|
Flexible GNSS Antenna - U.FL
|
|
|
|
SparkFun Accessories Pogo pins make life so much easier when you are trying to program without having to solder a single thing and when you attach them to an In-system programming (ISP) adapter they become instantly better. This simple kit allows you to do just that. T
- KIT-23451
- SparkFun
-
Restricted Availability
|
Mouser Part No
474-KIT-23451
|
SparkFun
|
SparkFun Accessories Pogo pins make life so much easier when you are trying to program without having to solder a single thing and when you attach them to an In-system programming (ISP) adapter they become instantly better. This simple kit allows you to do just that. T
|
|
|
|
|
|
|
Adapters
|
ISP Pogo
|
|
|
|
SparkFun Accessories Your first exposure to electrical engineering - the bread board. Who knew it would bring so much frustration?This is your standard solderless breadboard - three binding posts two power buses black aluminum plate backing. It works with a wide variet
- PRT-00112
- SparkFun
-
Restricted Availability
|
Mouser Part No
474-PRT-00112
|
SparkFun
|
SparkFun Accessories Your first exposure to electrical engineering - the bread board. Who knew it would bring so much frustration?This is your standard solderless breadboard - three binding posts two power buses black aluminum plate backing. It works with a wide variet
|
|
|
|
|
|
|
Breadboards
|
|
|
|
|
SparkFun Accessories Break Away Headers - Straight
- PRT-00116
- SparkFun
-
Restricted Availability
|
Mouser Part No
474-PRT-00116
|
SparkFun
|
SparkFun Accessories Break Away Headers - Straight
|
|
|
|
|
|
|
Connectors
|
Headers & Wire Housings
|
|
|
|
SparkFun Accessories Standard 22 AWG solid Black hook up wire. Use this with your bread board or any project in which you need sturdy wire. Comes in small spools of 25'.
- PRT-08022
- SparkFun
-
Restricted Availability
|
Mouser Part No
474-PRT-08022
|
SparkFun
|
SparkFun Accessories Standard 22 AWG solid Black hook up wire. Use this with your bread board or any project in which you need sturdy wire. Comes in small spools of 25'.
|
|
|
|
|
|
|
Wire & Cable
|
|
|
|
|
SparkFun Accessories Standard 22 AWG solid Red hook up wire. Use this with your bread board or any project in which you need sturdy wire. Comes in small spools of 25'.
- PRT-08023
- SparkFun
-
Restricted Availability
|
Mouser Part No
474-PRT-08023
|
SparkFun
|
SparkFun Accessories Standard 22 AWG solid Red hook up wire. Use this with your bread board or any project in which you need sturdy wire. Comes in small spools of 25'.
|
|
|
|
|
|
|
Wire & Cable
|
|
|
|
|
SparkFun Accessories Standard 22 AWG solid Yellow hook up wire. Use this with your bread board or any project in which you need sturdy wire. Comes in small spools of 25'.
- PRT-08024
- SparkFun
-
Restricted Availability
|
Mouser Part No
474-PRT-08024
|
SparkFun
|
SparkFun Accessories Standard 22 AWG solid Yellow hook up wire. Use this with your bread board or any project in which you need sturdy wire. Comes in small spools of 25'.
|
|
|
|
|
|
|
Wire & Cable
|
|
|
|
|
SparkFun Accessories Standard 22 AWG solid White hook up wire. Use this with your bread board or any project in which you need sturdy wire. Comes in small spools of 25'.
- PRT-08026
- SparkFun
-
Restricted Availability
|
Mouser Part No
474-PRT-08026
|
SparkFun
|
SparkFun Accessories Standard 22 AWG solid White hook up wire. Use this with your bread board or any project in which you need sturdy wire. Comes in small spools of 25'.
|
|
|
|
|
|
|
Wire & Cable
|
|
|
|
|
SparkFun Accessories This is a SparkFun exclusive! These are 155mm long jumpers with male connectors on both ends. Use these to jumper from any female header on any board to any other female header. Combine these with our female to female jumpers to create a male to fem
- PRT-08431
- SparkFun
-
Restricted Availability
|
Mouser Part No
474-PRT-08431
|
SparkFun
|
SparkFun Accessories This is a SparkFun exclusive! These are 155mm long jumpers with male connectors on both ends. Use these to jumper from any female header on any board to any other female header. Combine these with our female to female jumpers to create a male to fem
|
|
|
|
|
|
|
Wire & Cable
|
Jumper Wire
|
|
|
|
SparkFun Accessories Screw Terminals 5mm Pitch (2-Pin)
- PRT-08432
- SparkFun
-
Restricted Availability
|
Mouser Part No
474-PRT-08432
|
SparkFun
|
SparkFun Accessories Screw Terminals 5mm Pitch (2-Pin)
|
|
|
|
|
|
|
Connectors
|
Fixed Terminal Blocks
|
|
|
|
SparkFun Accessories This is a SparkFun exclusive! These are 155mm long jumpers. Multiple jumpers can be installed next to one another on a 0.1" header. Comes as 1 package of one hundred jumpers (colors shown) 50 pieces male-to-male and 50 pieces female-to-female.Dimens
- PRT-09194
- SparkFun
-
Restricted Availability
|
Mouser Part No
474-PRT-09194
|
SparkFun
|
SparkFun Accessories This is a SparkFun exclusive! These are 155mm long jumpers. Multiple jumpers can be installed next to one another on a 0.1" header. Comes as 1 package of one hundred jumpers (colors shown) 50 pieces male-to-male and 50 pieces female-to-female.Dimens
|
|
|
|
|
|
|
Wire & Cable
|
Jumper Wire
|
|
|
|
SparkFun Accessories This is a SparkFun exclusive! These are 12" long jumper wires terminated as male to female. Use these to jumper from any male or female header on any board. Multiple jumpers can be connected next to one another on a 0.1" header. Comes in five packs o
- PRT-09386
- SparkFun
-
Restricted Availability
|
Mouser Part No
474-PRT-09386
|
SparkFun
|
SparkFun Accessories This is a SparkFun exclusive! These are 12" long jumper wires terminated as male to female. Use these to jumper from any male or female header on any board. Multiple jumpers can be connected next to one another on a 0.1" header. Comes in five packs o
|
|
|
|
|
|
|
Wire & Cable
|
Jumper Wire
|
|
|
|
SparkFun Accessories This is a SparkFun exclusive! These are 12" long jumper wires terminated as female to female. Use these to jumper from any male header on any board. Multiple jumpers can be connected next to one another on a 0.1" header. Comes in one package of ten j
- PRT-09389
- SparkFun
-
Restricted Availability
|
Mouser Part No
474-PRT-09389
|
SparkFun
|
SparkFun Accessories This is a SparkFun exclusive! These are 12" long jumper wires terminated as female to female. Use these to jumper from any male header on any board. Multiple jumpers can be connected next to one another on a 0.1" header. Comes in one package of ten j
|
|
|
|
|
|
|
Wire & Cable
|
Jumper Wire
|
|
|
|
SparkFun Accessories This is a SparkFun exclusive! These are 12" long jumper wires terminated as female to female. Use these to jumper from any male header on any board. Multiple jumpers can be connected next to one another on a 0.1" header. Comes in five packs of twenty
- PRT-09390
- SparkFun
-
Restricted Availability
|
Mouser Part No
474-PRT-09390
|
SparkFun
|
SparkFun Accessories This is a SparkFun exclusive! These are 12" long jumper wires terminated as female to female. Use these to jumper from any male header on any board. Multiple jumpers can be connected next to one another on a 0.1" header. Comes in five packs of twenty
|
|
|
|
|
|
|
Wire & Cable
|
Jumper Wire
|
|
|
|
SparkFun Accessories 9V to Barrel Jack Adapter
- PRT-09518
- SparkFun
-
Restricted Availability
|
Mouser Part No
474-PRT-09518
|
SparkFun
|
SparkFun Accessories 9V to Barrel Jack Adapter
|
|
|
|
|
|
|
Adapters
|
DC Power Cords
|
|
|
|
SparkFun Accessories This is a simple two wire cable. Great for jumping from board to board or just about anything else. There is a 2-pin JST connector on one end bare cable on the opposite end. It also comes with the mating connector for the JST.Dimensions: 6" lengthDo
- PRT-09914
- SparkFun
-
Restricted Availability
|
Mouser Part No
474-PRT-09914
|
SparkFun
|
SparkFun Accessories This is a simple two wire cable. Great for jumping from board to board or just about anything else. There is a 2-pin JST connector on one end bare cable on the opposite end. It also comes with the mating connector for the JST.Dimensions: 6" lengthDo
|
|
|
|
|
|
|
Wire & Cable
|
Jumper Wire
|
|
|
|
SparkFun Accessories Break Away Headers - Long
- PRT-10158
- SparkFun
-
Restricted Availability
|
Mouser Part No
474-PRT-10158
|
SparkFun
|
SparkFun Accessories Break Away Headers - Long
|
|
|
|
|
|
|
Connectors
|
Headers & Wire Housings
|
|
|
|
SparkFun Accessories This is a simple two wire cable. Great for jumping from board to board or just about anything else. There is a 2-pin JST RE connector on both ends. These are simple jumper wires used on standard 0.1" breakaway headers.Dimensions: 4" lengthDocuments:D
- PRT-10362
- SparkFun
-
Restricted Availability
|
Mouser Part No
474-PRT-10362
|
SparkFun
|
SparkFun Accessories This is a simple two wire cable. Great for jumping from board to board or just about anything else. There is a 2-pin JST RE connector on both ends. These are simple jumper wires used on standard 0.1" breakaway headers.Dimensions: 4" lengthDocuments:D
|
|
|
|
|
|
|
Wire & Cable
|
Jumper Wire
|
|
|
|
SparkFun Accessories This is a simple three wire cable. Great for jumping from board to board or just about anything else. There is a 3-pin JST RE connector on both ends. These are simple jumper wires used on standard 0.1" breakaway headers.Dimensions: 4" lengthDocuments
- PRT-10363
- SparkFun
-
Restricted Availability
|
Mouser Part No
474-PRT-10363
|
SparkFun
|
SparkFun Accessories This is a simple three wire cable. Great for jumping from board to board or just about anything else. There is a 3-pin JST RE connector on both ends. These are simple jumper wires used on standard 0.1" breakaway headers.Dimensions: 4" lengthDocuments
|
|
|
|
|
|
|
Wire & Cable
|
Jumper Wire
|
|
|
|
SparkFun Accessories This is a simple four wire cable. Great for jumping from board to board or just about anything else. There is a 4-pin JST RE connector on both ends. These are simple jumper wires used on standard 0.1" breakaway headers.Dimensions: 4" lengthDocuments:
- PRT-10364
- SparkFun
-
Restricted Availability
|
Mouser Part No
474-PRT-10364
|
SparkFun
|
SparkFun Accessories This is a simple four wire cable. Great for jumping from board to board or just about anything else. There is a 4-pin JST RE connector on both ends. These are simple jumper wires used on standard 0.1" breakaway headers.Dimensions: 4" lengthDocuments:
|
|
|
|
|
|
|
Wire & Cable
|
Jumper Wire
|
|
|
|
SparkFun Accessories This is a simple five wire cable. Great for jumping from board to board or just about anything else. There is a 5-pin JST RE connector on both ends. These are simple jumper wires used on standard 0.1" breakaway headers.Dimensions: 4" lengthDocuments:
- PRT-10365
- SparkFun
-
Restricted Availability
|
Mouser Part No
474-PRT-10365
|
SparkFun
|
SparkFun Accessories This is a simple five wire cable. Great for jumping from board to board or just about anything else. There is a 5-pin JST RE connector on both ends. These are simple jumper wires used on standard 0.1" breakaway headers.Dimensions: 4" lengthDocuments:
|
|
|
|
|
|
|
Wire & Cable
|
Jumper Wire
|
|
|
|
SparkFun Accessories This is a simple six wire cable. Great for jumping from board to board or just about anything else. There is a 6-pin JST RE connector on both ends. These are simple jumper wires used on standard 0.1" breakaway headers.Dimensions: 4" lengthDocuments:D
- PRT-10366
- SparkFun
-
Restricted Availability
|
Mouser Part No
474-PRT-10366
|
SparkFun
|
SparkFun Accessories This is a simple six wire cable. Great for jumping from board to board or just about anything else. There is a 6-pin JST RE connector on both ends. These are simple jumper wires used on standard 0.1" breakaway headers.Dimensions: 4" lengthDocuments:D
|
|
|
|
|
|
|
Wire & Cable
|
Jumper Wire
|
|
|
|
SparkFun Accessories This is a simple two wire cable. Great for jumping from board to board or just about anything else. There is a 2-pin JST RE connector on both ends. These are simple jumper wires used on standard 0.1" breakaway headers.Dimensions: 6" lengthDocuments:D
- PRT-10367
- SparkFun
-
Restricted Availability
|
Mouser Part No
474-PRT-10367
|
SparkFun
|
SparkFun Accessories This is a simple two wire cable. Great for jumping from board to board or just about anything else. There is a 2-pin JST RE connector on both ends. These are simple jumper wires used on standard 0.1" breakaway headers.Dimensions: 6" lengthDocuments:D
|
|
|
|
|
|
|
Wire & Cable
|
Jumper Wire
|
|
|
|
SparkFun Accessories This is a simple three wire cable. Great for jumping from board to board or just about anything else. There is a 3-pin JST RE connector on both ends. These are simple jumper wires used on standard 0.1" breakaway headers.Dimensions: 6" lengthDocuments
- PRT-10368
- SparkFun
-
Restricted Availability
|
Mouser Part No
474-PRT-10368
|
SparkFun
|
SparkFun Accessories This is a simple three wire cable. Great for jumping from board to board or just about anything else. There is a 3-pin JST RE connector on both ends. These are simple jumper wires used on standard 0.1" breakaway headers.Dimensions: 6" lengthDocuments
|
|
|
|
|
|
|
Wire & Cable
|
Jumper Wire
|
|
|
|
SparkFun Accessories This is a simple four wire cable. Great for jumping from board to board or just about anything else. There is a 4-pin JST RE connector on both ends. These are simple jumper wires used on standard 0.1" breakaway headers.Dimensions: 6" lengthDocuments:
- PRT-10369
- SparkFun
-
Restricted Availability
|
Mouser Part No
474-PRT-10369
|
SparkFun
|
SparkFun Accessories This is a simple four wire cable. Great for jumping from board to board or just about anything else. There is a 4-pin JST RE connector on both ends. These are simple jumper wires used on standard 0.1" breakaway headers.Dimensions: 6" lengthDocuments:
|
|
|
|
|
|
|
Wire & Cable
|
Jumper Wire
|
|
Singapore