New Common Mode Filter Chokes
Bourns CCF1206 Multilayer Common Mode Filters offer reliable performance through composite co-fired materials. The monolithic construction achieves a compact size, improving space efficiency and supporting complex circuit designs in small devices. These Bourns multilayer common mode filters offer a -40°C to +85°C operating temperature range and a 67Ω to 120Ω impedance range. The CCF1206 is ideal for high-speed differential signal transmission lines, such as USB and LVDS, and MIPI and MHL serial interfaces in mobile devices.
-
Bourns CCF1206 Multilayer Common Mode FiltersOffers reliable performance through composite co-fired materials.24/6/2025
-
Bourns SRF1209U4 Common-Mode Chip InductorsProvides high impedance over a high frequency range.2/6/2025 -
Fastron 1812CMF/E Common-Mode Filter Chip InductorsProtects differential signal paths from common-mode disturbances.25/2/2025 -
Signal Transformer / Bel SNCMC Nanocrystalline Common Mode ChokesHigh efficiency and low power loss in a small, lightweight package designed for vertical mounting.23/1/2025 -
TDK B82725S2xA0 SurfIND High-Current ChokesFeature approximately 0.6% to 1% stray inductance range for symmetrical interference suppression.31/12/2024 -
Vishay Common Mode ChokesSurface-mount package in range of sizes, including 0603, 0805, 1206, 1210, 1812, 2020, 5050, & 6050.20/12/2024 -
Vishay ICM6050 High-Current Common Mode Chokes125VDC voltage range and wirewound ferrite in a 15mm x 13mm x 6mm SMD package.9/12/2024 -
Vishay ICM5050 High-Current Common Mode Chokes80VDC voltage range and wirewound ferrite in a 12mm x 11mm x 6mm SMD package.9/12/2024 -
Vishay ICM2020 High-Current Common Mode Chokes80VDC voltage range and wirewound ferrite in a 5.5mm x 5.5mm x 3.5mm SMD package.9/12/2024 -
Vishay ICM1812 Surface-Mount Common Mode Chokes50VDC voltage range and wirewound ferrite in a 4.5mm x 3.2mm x 2.8mm SMD package.9/12/2024 -
Vishay ICM0603 Surface-Mount Common Mode Chokes50VDC voltage range and wirewound ferrite in a 1.6mm x 0.85mm x 1.25mm SMD package.9/12/2024 -
Würth Elektronik WE-HEPA High-Efficiency Power ChokesOffer a higher saturation current and are available in 5030 and 6030 sizes.13/11/2024 -
Bourns CM1309 Common Mode ChokesOffers a nominal inductance range of 1mH to 8.7mH and a 0.7A to 2.8A current range.30/10/2024 -
Bourns SRF0502 Line FiltersLow-profile design of 2.5mm, currency ratings of up to 6A, and frequency ranges of up to 900MHz.29/10/2024 -
Schurter DKCV-1 Compensated ChokesFeature compact design with a small footprint and optimize heat dissipation by the open design.4/10/2024 -
Murata UCMH90 Common Mode Choke Coil/Noise FilterDesigned for automotive powertrains and safety equipment available in Surface Mount Device (SMD).11/9/2024 -
TDK TCM-U Thin Film Common Mode filtersFeatures a wide frequency range designed for ultra-high-speed differential signal interfaces.20/8/2024 -
Vishay IFLNx Common Mode ChokesFeatures up to 2Ω maximum DCR (+25°C) and up to 360mA typical heat rating current DC.22/7/2024 -
Taoglas TCM Common Mode ChokesAvailable with 100mA or 350mA current rating and 60VDC maximum voltage in an 1812 or 2518 size.12/7/2024 -
TE Connectivity RT Series N Current-Compensated EMC/RFI Chokes2- and 3-wire configurations optimised to filter EMI noise on AC power lines up to 600VAC.26/6/2024 -
Signal Transformer / Bel SPFC High Frequency PFC ChokesFeatures various PCB THT mounting platforms designed for active PFCs and SMPS.18/6/2024 -
Bourns SRF3225TABG Common Mode Chip InductorFeatures a ferrite core, offering a compact size and high impedance across a broad frequency range.6/5/2024 -
Bourns SRF4532TA Series Common Mode Chip InductorsAEC-Q200-qualified, 90Ω-2800Ω impedance range, 50VDC rated voltage, and a high current of up to 4A.6/5/2024 -
TDK ADF32T Data & Signal Line ChokesOffers a rated voltage of 42VAC and 80VDC and is qualified to AEC-Q200 standards.2/5/2024 -
Eaton CLCC Series Common Mode InductorsOffers flexibility and a reliable network PHY interface and is packaged in two sizes: 3216 and 2012.26/3/2024