New CAN Interface IC
NXP Semiconductors TJA1445 and TJA1446 Advanced High-Speed CAN Transceivers feature a partial networking sleep mode and implement CAN FD as defined in ISO11898-2:2024 parameter sets A-B. These NXP Semiconductors TJA144x transceivers are fully interoperable with the high-speed classical CAN and CAN FD protocols and have been fully developed and certified to be ISO 26262 ASIL-B compliant. TJA144x supports CAN partial networking using selective wake-up functionality (as specified in ISO 11898-2:2024), allowing the transceiver to remain in sleep mode even when CAN bus traffic is running (when it is not required to be active). The TJA1445 offers a CAN FD passive feature (in sleep mode) that prevents the transceiver from waking up and shields the CAN controller from CAN FD messages when running a mixed bus communication. The TJA1446 offers that feature and also shields from CAN XL messages.
-
NXP Semiconductors TJA1465/TJA1466 High-Speed CAN SIC TransceiversFeatures a partial networking sleep mode and implements CAN SIC.24/2/2025 -
NXP Semiconductors TJA1445/TJA1446 High-Speed CAN TransceiversFeatures a partial networking sleep mode and implements CAN FD.24/2/2025
-
Texas Instruments TCAN1043N-Q1 Automotive CAN FD TransceiverFeatures a high-speed CAN transceiver that meets the requirements of ISO 11898-2:2024.4/2/2025 -
Texas Instruments TCAN1472-Q1 Automotive Fault-Protected TransceiverHigh-speed Controller Area Network (CAN) with Signal Improvement Capability (SIC) transceiver.4/2/2025 -
Texas Instruments TCAN340x-Q1 Automotive CAN FD TransceiversCompatible with physical layer requirements of the ISO 11898-2:2016 high-speed CAN specification.1/8/2024 -
Infineon Technologies TLE935x Automotive CAN TransceiversDesigned for CAN FD networks in automotive applications.20/6/2024 -
Infineon Technologies TLE9350BVSJ High Speed CAN FD TransceiverUsed in HS CAN systems for automotive and industrial applications.4/4/2024 -
Infineon Technologies TLE9351BVSJ High-Speed CAN FD TransceiverDesigned to protect the microcontroller against interferences generated inside the network.22/3/2024 -
NXP Semiconductors Battery Management Systems (BMS)Enhances the performance and ensures the safety of a battery pack composed of multiple cells.4/3/2024 -
NXP Semiconductors Electric Vehicle (EV) Traction InvertersCritical devices in EV to convert DC power from the battery to AC power to drive the traction motor.19/1/2024 -
NXP Semiconductors TJA1051 High-Speed CAN TransceiversOffers an interface between a CAN protocol controller and the physical two-wire CAN bus.18/8/2023 -
NXP Semiconductors TJA1057 Mantis® High-Speed CAN TransceiversOffers optimized feature set for 12V automotive applications that require basic CAN functionality.30/5/2023 -
NXP Semiconductors TJA1044 Mantis® High-Speed CAN TransceiversDesigned for high-speed CAN applications in the automotive industry.19/5/2023 -
NXP Semiconductors TJA1042 High-Speed CAN TransceiversInterfaces between a CAN protocol controller and a physical two-wire CAN bus.19/5/2023 -
Infineon Technologies TLE937x Automotive CAN TransceiversActively improve the signal integrity in HS CAN for automotive and industrial applications.5/4/2023 -
Texas Instruments TCAN341x 3.3V CAN FD TransceiversThese devices are certified EMC operation for use with classical CAN FD & CAN networks up to 5Mbps.2/1/2023 -
Texas Instruments TCAN1462x-Q1 Automotive SIC CAN FD TransceiversDelivers reduced signal ringing and enables higher throughput in complex network topologies.30/9/2022 -
Texas Instruments TCAN1463-Q1 High-Speed CAN FD TransceiverSupports classical CAN and CAN FD (flexible data rate) data rates up to 8Megabits per second (Mbps).21/9/2022 -
Texas Instruments TCAN1167-Q1 Automotive CAN FD SBCMeets the physical layer requirements of the ISO 11898-2:2016 high-speed CAN specification.5/7/2022 -
Texas Instruments TCAN1162-Q1 Automotive CAN FD TransceiverMeets the physical layer requirements of the ISO 11898-2:2016 high-speed CAN specification.31/3/2022 -
Texas Instruments TCAN1162x-Q1 Automotive CAN FD TransceiversMeets the physical layer requirements of the ISO 11898-2:2016 high-speed CAN specification.31/3/2022